Mouthmun Tips

VoIP Adapter Installation Guide

 

ATA 171P ADAPTER Installation guide Information

ATA 171P (171 / 172 / 171M , ATA-S1 / S2 / P / M)

ATA 171P

 

ATA Network Diagram



1. Fix IP address for ATA Linksys process, instructions for check up and setup through telephone

Group
IVR Action
IVR Menu Choice
Parameter(s)
Notes:
Function Dial out from PSTN Line 0* None Press 0* can pass call to PSTN Line, user can dial out from PSTN Line. (For 171P and 171M)
Function Unlock keypad setting #190# None After you unlock keypad setting, then you may configure the ATA.
Function Reboot #195# None After you hear "Option Successful," hang-up. The system will reboot automatically.
Function Factory Reset #198# None System will automatically reboot. WARNING: ALL "User-Changeable" NONDEFAULT SETTINGS WILL BE LOST! This will include network and service provider data.
Function Enable PPTP client #116# None System will automatically reboot and PPTP client will be enabled
Function Disable PPTP client #117# None System will automatically reboot and PPTP client will be disabled
Function Enable VLAN #118# None System will automatically reboot and VLAN will be enabled
Function Disable VLAN #119# None System will automatically reboot and VLAN will be disabled
Function Enable Call Waiting #138# None System will automatically reboot and Call Waiting will be enabled
Function Disable Call Waiting #139# None System will automatically reboot and Call Waiting will be disabled
Function Enable Anonymous #140# None System will automatically reboot and Send Anonymous CID will be enabled
Function Disable Anonymous #141# None System will automatically reboot and Send Anonymous CID will be disabled
Function Blind Transfer #510# None Can only be performed in a phone call conversation. For 171M, this will transfer the current IP line to another IP line.
Function Attendant Transfer #511# None Can only be performed in a phone call conversation. For 171M, this will transfer the line to IP from PSTN (must be in IP mode to execute this command)
Function 3-way calling (IP Conference) #512# None Can only be performed in a phone call conversation.
Function Function Attendant Transfer #514# None Can only be performed in a phone call conversation. For 171M, this will transfer the line to PSTN from IP (must be in PSTN mode to execute this command)
Info Check WAN IP Address #126# None IVR will announce the current WAN IP address of the ATA
Info Check LAN IP Address #120# None IVR will announce the current LAN IP address of the ATA
Info Check IP Type #121# None IVR will announce if DHCP in enabled or disabled.
Info

Check the Phone Number

#122# None IVR will announce current in use VoIP number
Info Check Network Mask #123# None IVR will announce the current network mask of the ATA.
Info Check Gateway IP Address #124# None IVR will announce the current gateway IP address of the ATA.
Info Check Primary DNS Server Setting #125# None IVR will announce the current setting in tne Primary DNS field.
Info Check Firmware Version #128# None IVR will announce the version of the firmware running on the ATA.
Setting Set DHCP client #111# None The system will change to DHCP
Setting

Set Static IP Address

#112xxx*xxx*xxx*xxx# Enter IP address using numbers on the telephone keypad. Use the * (star) key when entering a decimal point. DHCP will be disabled and system will change to the Static IP type.
Setting Set Network Mask #113xxx*xxx*xxx*xxx# Enter value-using numbers on the telephone keypad. Use the * (star) key when entering a decimal point. Must set Static IP first.
Setting Set Gateway IP Address #114xxx*xxx*xxx*xxx# Enter IP address using numbers on the telephone keypad. Use the * (star) key when entering a decimal point. Must set Static IP first.
Setting Set Primary DNS Server #115xxx*xxx*xxx*xxx# Enter IP address using numbers on the telephone keypad. Use the * (star) key when entering a decimal point. Must set Static IP first.
Setting Set Codec
#130+[1-8]# 1: G.711 u-Law, 2: G.711 a-Law, 4: G.729a, 5: G.726 16K, 6: G.726 24K, 7: G.726 32K, 8: G.726 40K, You can set the codec you want to the first priority.
Setting Set Handset Gain #131+[00~15]# Handset Gain from 0~15 You can set the Handset gain to proper value, default is 6
Setting Set Handset Volume #132+[00~12]# Handset Volume from 0~12 You can set the Handset volume to proper value, default is 10
Setting Setting Set Auto Configuration Mode #137X# Select the auto configuration mode, in the X field, you can press the following; 0:OFF 1:TFTP 2:FTP You can set the auto configuration method you want, default is off
Setting Set Auto Configuration For TFTP Server #135xxx*xxx*xxx*xxx# Enter IP address using numbers on the telephone keypad. Use the * (star) key when entering a decimal point. Must set auto configuration method to TFTP first
Setting Set Auto Configuration For FTP Server
#136xxx*xxx*xxx*xxx# Enter IP address using numbers on the telephone keypad. Use the * (star) key when entering a decimal point. Must set auto configuration method to FTP first

2.Instruction for setup through webpage

  • For new ATA device, Hard Reset is needed by press reset button at the back of machine with small paper clip about 10 seconds.
  • Connect Lan line from Router or Switch Hub which has Internet access to ATA (WAN Port) (Router must set as DHCP in order to distribute IP address to ATA)

3. Open Internet Browsers and type http://192.168.123.1:9999 or IP address gave by Router. It’s possible to check from telephone device by press#126# (Put Username as “Root” , Password is not required)

Login VoIP

4. After Logged in, go to Network >> WAN Settings (Set IP as DHCP type or fixed IP). Then, press Submit button.

WAN Settings

5. If you select, Fixed IP you must set LAN Settings as current using LanLAN Settings

6. Select SIP Settings >> Service Domainto set Username/Password Mouthmun and Proxy Server

Service Domain

7. Select Packet Codec>> G.729 or G.723or the following picture

Codec Settings

8. After completed all processes, Save Change and Reboot the device

Save Change & Reboot

Go to Top


end